Appendix
69
Troubleshooting
The layout of your home or ofce might be limiting the operating range. Try moving
the telephone base to another location, preferably to a higher location.
If other phones in your home are having the same problem, contact your telephone
service provider (charges may apply).
Test a working phone at the phone jack. If another phone has the same problem,
contact your telephone service provider (charges may apply).
Other electronic products such as HAM Radios and other DECT phones can cause
interference with your cordless phone. Try installing your phone as far away as possible
from these types of electronic devices.
Remove and install the battery again. Place the cordless handset in the handset
charger. Wait for the cordless handset to reestablish its connection with the telephone
base. Allow up to one minute for this to take place.
Your line cord may be defective. Try installing a new line cord.
My calls cut in and out while I’m using my cordless handset.
Other electronic products such as HAM Radios and other DECT phones can cause
interference with your cordless phone. Try installing your phone as far away as possible
from these types of electronic devices.
Do not install this phone near a microwave oven or on the same electrical outlet. You
may experience decreased performance while the microwave oven is operating.
If you plug your phone in with a modem or surge protector, plug the phone (or modem/
surge protector) into a different location. If this does not solve the problem, relocate your
phone or modem farther apart from one another, or use a different surge protector.
Relocate your telephone base to a higher location. The phone may have better
reception when installed in a high area.
If other phones in your home are having the same problem, contact your telephone
service provider (charges may apply).
The charge light is off or blinking.
Make sure you plug the power and line cords in correctly and securely.
Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute
for the cordless handset and telephone base to reset.
Clean the cordless handset and handset charger’s charging contacts each month with a pencil
eraser or cloth.
A blinking CHARGE light is an indication that the battery is not connected to the handset or
missing completely. Ensure that the battery is installed properly.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(55 pages)
(67 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals