Vtech LS6325-2 User Manual download pdf (Page 5)

Intercom

Use the intercom feature for conversation between two system

handsets, or a handset and a headset.

You can use a maximum of ve handsets, or four handsets and

a headset at the same time. Only two handsets, or one handset

and one headset can be used on an intercom call. Only three

handsets, or two handsets and one headset can be used on an

outside call.

If there is an incoming call while the originating handset is

making an intercom request, the intercom request will be

stopped.

To initiate an intercom call:

Press INT when the handset is not in use.

If you have more than two handsets, use the dialing keys to

select the destination handset or press # (pound key) for the

destination headset.

To answer an intercom call:

Press /FLASH, , INT or any of the dialing keys on the

destination handset.

Press on the headset.

To end an intercom call:

Press OFF/CLEAR or place the handset back in the telephone

base or its charger.

Press or place the headset in its charger.

Push to talk (PTT)

Use the push to talk feature to broadcast messages from one

handset to the speakerphone of one or all other handsets.

Only one PTT can be active at a time and only one handset

can talk at a time.

You must release PUSH TO TALK so the other person can

respond.

While PTT is in use between two handsets, other handsets

cannot use the intercom feature but can access the answering

system.

To initiate a PTT call:

Press and hold PUSH TO TALK when the handset is not in

use. When the connection is made, all handsets display

Press and hold [PTT] to talk and beep once.

Press and hold PUSH TO TALK on your handset again. A

chirp indicates your microphone is on. Speak towards the

handset. Your voice is broadcast to all destination handsets.

Release PUSH TO TALK after speaking. All handsets beep

once again. After the handsets beep, you can press and hold

PUSH TO TALK to continue speaking or the destination

handsets can respond.

To answer a PTT call:

When your handset receives a PTT call, the handset beeps

and the screen displays Press and hold [PTT] to talk.

When someone else is speaking, your speakerphone light is

on. When your speakerphone light is off, press and hold

PUSH TO TALK on your handset. When you hear a chirp,

speak towards the handset.

Release PUSH TO TALK after speaking. Your handset will

beep. After the beep, you can press and hold PUSH TO TALK

to continue speaking or the destination handset can respond.

To end a PTT call:

Press OFF/CLEAR or place the handset back in the telephone

base or charger.

•

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Vtech LS6325-2 User Manual Page 5

Comments to this Manuals

Related products and manuals for Phones Vtech LS6325-2