VTech 2625 User Manual download pdf (Page 7)

CORDLESS TELEPHONE

VTECH TELECOMMUNICATIONS LTD.

DC 9V 150mA

CLASS 2 POWER SOURCE ONLY

To AC outlet

Setup

Getting Started

Installation and Charge of Battery Cells in Handset

Follow the steps below:

1. Place the new battery cells in the

Handset with the positive and

negative poles aligned in the battery

compartment.

2. Replace the battery cover by sliding it

upwards

3. If the new battery cells are not already

charged, place the Handset in its

Charger or Base Unit, and allow it to

charge for 10-12 hours. After initial

charge, a maintenance charge of 8

hours should be sufficient.

WARNING: Alkaline batteries must NOT be used in your ev 2625 cordless

telephone. Use only the batteries that came with your phone, or contact

our Customer Support Center (contact information on page 2) to order

additional batteries.

2. Choose the location for your Handset Charger, and plug its power supply into an

electrical outlet.

Charging of the Handset Battery Cells

The Handset of your cordless telephone is powered by rechargeable battery cells. It

charges automatically whenever the Handset is in its charger or Base Unit.

You should charge the battery cells for at least 12 hours when you first

receive your phone. You’ll know the battery cells needs charging when:

• The low battery message and the icon are

displayed.

• The Handset seems completely dead, the

LCD is completely clear and does not

activate when you press the keys.

LOW BATTERY

NOTE: When in LOW BATTERY mode, the keypad sounds, backlighting and speakerphone

features will not work. When your battery has been charged, your features will return

to their normal function.

1 2 3 4 5 6 7 8 9 10 11 12 ... 36 37

No comments

VTech 2625 User Manual Page 7